Chronograph Reset (Inc. After Replacing Battery) - Lotus ILM6S30 Betriebsanleitung

CHRONOGRAPH RESET VISUALIZACIÓN Y BOTONES
This procedure shoud be performed when the chronograph second hand does not return to
the Zero position.
1. Pull the crown out to the 2nd Click Position.
2. Press the button "A" once to set the chronograph second hand to the Zero position.
3. Press the button "B" once to set the chronograph 1/20 second hand to the Zero position.
* The chronograph hands can be advanced rapidly by continuously pressing button "A" or "B".
4. Once the hands are set at Zero position, reset the time and return the crown to its normal
position.
ILM6S30
(incl. after replacing battery)
18
By virtue of the regulations pursuant to the handling of waste products deriving
from electronic and electrical equipment, end of lifecycle watch making products
must be selectively collected for processing. You may therefore dispose of your
quartz watch making products at any of our retail outlets or any other authorized collection
point. The selective collection, processing, rating and recycling of these products helps
contribute to safeguarding the environment and protecting our health.
19