Hama STEEL DRUM Bedienungsanleitung Seite 9

• Check whether your terminal device
and the speaker are less than 10
metres apart. If not, move them closer
together.
• Check whether obstacles are impairing
the range. If so, move the devices
closer together.
4.5 Audio playback (via Bluetooth
Start and control audio playback on the
connected terminal device accordingly.
Alternatively, audio playback can also be
controlled on the speaker (if the connected
device supports this function).
►
• Press the function button (3) to start or
pause audio playback.
• Briefly press the + function button (2) to
increase the volume.
• Briefly press the - function button (4) to
reduce the volume.
• Hold down the + function button (2) to skip
to the next track.
• Hold down the - function button (4) to go
back to the previous track.
6
4.6 Audio playback via the included audio
cable (3.5 mm jack)
• Ensure that the speaker is switched off.
• Connect your mobile terminal device (MP3
player, smartphone, etc.) and the AUX input
(8) of the speaker using the included 3.5
mm audio cable.
• Set the volume on your terminal device
to a low level.
)
®
• Switch on the speakers as described in 4.1
Switching the product on and off.
• Start and control audio playback on the
connected terminal device accordingly.
• If the device does not automatically start
in AUX mode, press the Mode button (5)
repeatedly until you are able to play audio
from the desired source.
• Press and hold the Plus button (2) to
increase the volume. Press and hold the
Minus button (4) to reduce the volume.
• Briefly press the Function button (3) to
pause playback.
Please note that you cannot establish the
Bluetooth
4.4 and 4.5 if an audio cable is connected.
Note
connection described under
®