Relative Humidity - Klarstein VapoAir Opal Handbuch

EN
Setting the timer
Press the TIMER button, the LED display shows the timer. There are 12 timer settings: 1, 2,
3, 4, 5, 6, 7, 8, 9, 10, 1 1, 12 hours. The timer displays the remaining running time in 1 hour
steps. For example, if the timer is set to 12 hours, the LED display shows[1 1] after one hour. The
display shows the current temperature and the rest time alternately at 30-second intervals. To
know what time has been set, simply press the timer button. Press the button again to reset the
timer.
Heating and ionizer function
Press the button for the heating and plasma function. Warm fog emerges after 10~15 minutes.
The warm fog symbol appears on the display Press the button again to start the ionizer. The
ionizer symbol appears on the display. Press the button again to stop the warm fog.
After 5~10 minutes cold fog appears again. Press the button again to stop the ionizer.
Setting the fog quantity and display brightness
Stroke the bottom bar to set the mist level from 1-7. When you are in Auto, Baby or
Health mode, stroke the bar to exit and switch to manual mode. Brush to the left to
reduce the amount of mist and the display brightness. Brush to the right to increase the amount
of mist and the display brightness.
Low water warning
If the amount of water in the tank is too low to keep the machine running, the machine stops
automatically. The display shows the symbol for low water . Top up the water and the unit
starts again after 5 seconds. If you do not top up water within 5 minutes, the unit switches off
automatically.

RELATIVE HUMIDITY

The percentage of water mist in a given space with a given air temperature is named
as relative humidity, usually marked as %RH, i.e. 45%RH. The air contains water mist
more or less. The proportion of water mist to the air varies according to different air
temperatures. The higher the temperature, the more water mist inhaled in the air.
22