Night Mode - Klarstein VapoAir Opal Handbuch

Health Mode
• Press the Health mode button on the remote control. The symbol for warm fog
on. The device runs at high speed and tries to reach an air humidity of 60%.
• As soon as an air humidity of 60% has been reached, the device runs only at low
speed.
• In Health mode, only the timer function can be used. Humidity and temperature are
fixed.
• The unit checks the humidity every minute.
Baby Mode
• In this mode, the warm fog and ionizer functions are also activated. The baby mode
icon, the warm fog icon
The device runs at high speed and tries to reach an air humidity of 55%.
• As soon as an air humidity of 55% has been reached, the device runs only at low
speed.
• In Health mode, only the timer function can be used. Humidity and temperature are
fixed.
• The unit checks the humidity every minute.

Night Mode

Press the night mode button on the remote control. The indicator light on the water tank
goes out. After 5 seconds without operation, the display turns off, only the symbol for
the post-mode remains on. Press any button to turn the display back on. Press the night
mode button again to turn off the night mode.
Note: If they are in a mode other than night mode, press and hold the night mode
button for 3 seconds to turn the water tank light on and off.
and the inonizer icon will appear on the display.
is
EN
21