Vasco NIVA FC series Installationsanweisung Seite 59

Using the paper template, trace the position of the two fixing brackets on the
INSTALLATION
wall. Use a suitable drill to make the holes with and insert the toggle bolts (2
for each bracket); fix the two brackets. Do not over-tighten the screws so that
the brackets can be adjusted with a spirit level.
Fully tighten the four screws to block the two brackets.
Check the stability by manually moving the brackets to the right and to the left,
up and down.
Mount the unit, checking that it fits correctly onto the brackets and checking
that it is stable.
Mounting template
1 2 3
A
B
C
D
E
F
G
H
J
K
L
M
1 2 3
brackets
4 5 6 7 8 9 10
4 5 6 7 8 9 10
A B A
11 12 13 14 15 16
1 2 3 4 5
A
A
B
B
TOP EDGE OF THE MACHINE.
INLET POSITION FOR INSTALLATION C
WITH 3-WAY VALVE AND FITTING SPACER.
C
Ø8 HOLES FOR DOWELS
D
D
LEVEL FOR ALIGNMENT.
E
E
F
TO INSTALL THE SL400 AND SL600 MODEL,
F MAKE SURE THE TWO TEMPLATES ARE
SPACED ACCORDING TO THE TABLE.
OUTLET WITH 3-WAY VALVE.
G
G
H
H
J
CONDENSATE DRAIN.
J
K
K
BOTTOM EDGE OF THE MACHINE.
L
L
POSITION FLUSH OF THE FLOOR.
M
PROJECT MACHINE NR.
DATUM GET.
BENAMING Jimmy P.
M
TEKENING NR.
Muur Sjabloon
SCHAAL
ISO B 3650 DILSEN Tel. +32 (089) 79.04.11 A0
11 12 13 14 Fax. +32 (089) 79.05.00 (1:2)
1 2 3 4 5
B
6 7 8 9 10 11 12
TOP EDGE OF THE MACHINE.
Ø8 HOLES FOR DOWELS
LEVEL FOR ALIGNMENT.
TO INSTALL THE SL400 AND SL600 MODEL,
MAKE SURE THE TWO TEMPLATES ARE
SPACED ACCORDING TO THE TABLE.
DISTANCE IN mm BETWEEN
MODEL DISTANCE IN mm BETWEEN
THE TWO TEMPLATES MODEL
THE TWO TEMPLATES
SL200 0 SL200 0
SL400 200 SL400 200
SL600 400 SL600 400
ELECTRICAL CONNECTION ZONE.
BOTTOM EDGE OF THE MACHINE.
POSITION FLUSH OF THE FLOOR.
6 7 8 9 10 11 12
INSTALLATION
NL
FR
DE
EN
13 14 15 16
IT
PL
PROJECT MACHINE NR.
99 Ventilo
DATUM GET.
BENAMING 4/09/2017 JD
Ventilo niva mounting template TEKENING NR.
99.00.97.98
Tel. +32 (089) 79.04.11 SCHAAL A0
ISO B 3650 DILSEN (1:2)
13 14 Fax. +32 (089) 79.05.00
07