Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Output-adjustments
Each output channel of the DXO-48 has a separate menu key. There are 6 menu pages for each output
channel.
1. Signal – Signal Parameter Menu
LEVEL
Gain, adjustable from - 40 dB to +15 dB in 0.25 dB steps.
POL - Polarity
Can be normal (+) or inverted (-).
DELAY
Delay in 21 µs steps. Can be displayed in ms, ft or m. The time unit of the delay can b e changed in the
System Menu. The maximum possible delay is 24,000 steps (500 ms) per channel.
2. EQ – EQ Parameter Menu
OUT_1:XXXXXX MENU:EQ
EQ
#
:1
LEVEL:0.00dB
FREQ :1000Hz TYPE:PEQ
EQ#
Selects one of the 6 available equalizers.
LEVEL
EQ level gain. Ranges from -30 dB to +15 dB in 0.25 dB steps.
FREQ
EQ center frequency. Ranges from 20 Hz to 20 kHz in either 1 Hz steps or 1/36 octave steps. The sampling
rate and the frequency steps can be selected in the System Menu.
BW
EQ bandwith. Ranges from 0.02 to 2.5 octaves in steps of 0.1 octave steps for PEQ. The Q value is
automatically shown beneatch the octave value.
For Lo-shf or Hi-shf it is eatiher 6 or 12 dB/oct.
TYPE
Type of EQ. The types can be parametric (PEQ), Lo-shelf (Lo-shf) and Hi-shelf (Hi-shf).
BW:0.33oct
Q=4.36
29/32
10356360_V_1_1.DOC
Werbung
Inhaltsverzeichnis
