Using The Alarm Function - Breitling Aerospace Bedienungsanleitung

3.4 USING THE ALARM FUNCTION

Select the AL (alarm) function.
Pull the crown out: the digits will flash.
display the desired alarm time by rotating the crown for-
ward or backward (rapid rotation changes the hour read-
out, slow rotation changes the minute readout).
Push the crown back in. AL appears, confirming that the
alarm function is running.
When the alarm sounds, press on the crown to end the
buzzing.
48
to set or reset the alarm, press on the crown after selecting the AL (alarm)
function.
AL displayed: alarm on.
OF displayed: alarm off.
to test the alarm function, press on the crown during more
than two seconds after selecting the AL (alarm) function:
the buzzer will sound.
Note: remember to take into account the watch's time mode (2x12h or 24h)
when setting the alarm to the desired time (see 2.1).
49