Useful Tips; Cleaning And Maintenance - Lelit PL41LEM Bedienungsanleitung

39. IMPORTANT: after you have frothed your milk, reopen the steam/hot water knob (4), position the steam
switch (13) on hot water (middle) and push up the switch (22). When the water flows out of the steam tube
(6), close the steam/hot water knob (4) again, at the same time push down the switch (22) and re-position
the switch (13) on coffee again (down). Clean carefully the steam/hot water tube (6). This operation is
needed to restore the water circuit inside the machine's tubes.
Hot water:
40. Check that the water tank has been filled in with water by looking at the water level indicator (20).
41. Press the on/off switch (11): the indicator light (14) will come on. Do this operation only if the machine is off.
If it's on pass to the following point.
42. Position the lever switch (13) on hot water (middle).
43. As soon as the indicator light (21) remains on, the machine is ready for use. PL41LEMAUS: the indicator light
(21) goes off.
44. Open the steam/hot water knob (4) and push up the lever switch (22).
45. Hot water will flow out from the steam arm (6) immediately.
46. Once you have got the desired quantity of hot water, push down the switch (22) and close the steam/water
knob (4).
47. After obtaining hot water from the arm (6), make sure that there is still water in the tank.

USEFUL TIPS:

The single cup filter (9), the two-cup filter (10) and the pod filter (18) do not need to be washed after each
-
use but please check that the holes are not blocked.
For best results, we suggest warming the cups up on the cup warmer (2) which works only when the machine
-
is on.

CLEANING AND MAINTENANCE

Cleaning and maintenance of the machine are essential for the quality of the coffee and the durability of the
appliance.
Cleaning
The machine must be cleaned at least once a week.
Before starting, remove the plug from the electrical outlet and allow the machine to cool.
Use a soft cloth, preferably microfiber, like the Lelit cloth (code MC972 - not included), and moisten
it with plain water. Do not use abrasive detergents and do not immerse the machine in water.
For thorough maintenance, we suggest you use the Lelit brush (code PL106 - not included), which will help you clean
the nozzles and the spaces between the ga-skets more effectively, removing stains and coffee residues from even
the smallest cracks.
Warm running water can be used to clean the removable parts of the machine. The filters and filterholder should
never be washed in a dishwasher.
There is no need to clean the filters after each use, but just to ensure they are not clogged.
However, to ensure the best performance from your machine, it is essential to thoroughly clean the steam wand and
filterholder after each use.
The filterholder should be cleaned to remove the greasy coffee residues that can negatively affect the taste of your
espresso.
Wash the exterior part of the steam wand with a damp cloth and release a little steam to remove any milk residues
from inside the tube, as these could obstruct the steam output, making it more difficult to froth milk properly.
Pagina 12
English