Siemens ANT795-6MT Kompaktbetriebsanleitung Seite 41

Mounting without brackets
①
Drilled holes and plugs
②
Mounting surface
③
QMA/N-Connect cable
④
Antenna
⑤
Screw
Follow the steps below to mount the antenna on a suspended ceiling liner without
brackets:
1. Drill holes for the antenna (6 mm diameter) in the ceiling liner and insert the plugs
in the holes.
2. Drill holes for the QMA/N-Connect connecting cables (diameter: min. 15 mm /
max. 35 mm) in the ceiling liner.
3. Remove the protective caps from the QMA connectors of the antenna.
4. Pull the QMA/N-Connect cables through the ceiling liner and connect them to the
antenna with the QMA connecting cables.
5. Secure the antenna with screws.
ANT795-6MT
A5E03484068-01, 09/2011
Mounting
41