Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch POF 1200 AE Originalbetriebsanleitung

16 | English
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended use

The power tool is intended for copy routing as well as routing
grooves, edges, profiles and elongated holes in wood,
plastic and light building materials while resting firmly on the
workpiece.
Can even be used to machine non-ferrous metals when used
at a low speed with the appropriate router bits.

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Lock-off button for on/off switch
(2) Right handle (insulated gripping surface)
(3) Spindle lock button
(4) Wing bolt for parallel guide rods (2x)
(5) Chip protection
(6) Base plate
(7) Guide plate
(8) Holder for parallel guide rods
(9) Step buffer
(10) Protective sleeve
(11) Wing bolt for adjusting the depth stop
(12) Slide with index mark
(13) Depth stop
(14) Scale for setting the routing depth
(15) Left handle (insulated gripping surface)

Technical data

Router
Article number
Rated power input
No-load speed
Speed preselection
Constant Electronic
Connection for dust extraction
Tool holder
Router cage stroke
Weight according to EPTA-Procedure 01:2014
1 609 92A 4N8 | (08.01.2019)
(16) Clamping lever for locking the routing depth
(17) Routing depth fine-adjustment scale
(POF 1400 ACE)
(18) Routing depth fine-adjustment knob (POF 1400 ACE)
(19) Marking for zeroing
(20) Unlocking lever for guide bushing
(21) Router bit
(22) On/off switch
(23) Speed preselection thumbwheel
(24) Adjusting screws for step buffer (POF 1200 AE)
(25) Cap nut with collet
(26) Open-ended spanner (19 mm)
(27) Extraction hose (dia. 35 mm)
(28) Dust extraction adapter
(29) Knurled screw for dust extraction adapter (2x)
(30) Parallel guide rod (2x)
(31) Parallel guide
(32) Centring pin
(33) Wing bolt for centring pin
(34) Curve guide
(35) Router compass/guide rail adapter
A)
(36) Handle for router compass
(37) Wing bolt for router compass coarse
adjustment (2x)
(38) Wing bolt for router compass fine adjustment (1x)
(39) Knob for router compass fine adjustment
(40) Centring screw
(41) Guide rail
(42) Spacer plate (part of the router compass set)
(43) Guide bushing
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
W
–1
min
mm
inches
mm
kg
A)
A)
A)
A)
A)
A)
A)
A)
A)
A)
A)
A)
A)
A)
A)
A)
POF 1200 AE POF 1400 ACE
3 603 B6A 0.1 3 603 B6C 7.1
1200
11000–28000 11000–28000
●
–
●
6/8
¼
55
3.4
Bosch Power Tools
A)
A)
A)
1400
●
●
●
6/8
¼
55
3.5