Product Specific Safety Notes - Mettler Toledo WMC25-SH Benutzerhandbuch

2 Safety Information
2.1 Intended use
Use the product only for weighing in accordance with this User manual.
•
The weigh module is intended for indoor use only.
•
Any other type of use and operation beyond the limits of technical specifications is considered as not
•
intended.
2.2 Definition of signal words and warning symbols
Safety notes are indicated by signal words and warning symbols and contain warnings and information
about safety issues. Ignoring safety notes can lead to personal injury, damage to the instrument,
malfunctions and erroneous results.
Signal words
WARNING
CAUTION
NOTICE
Note
Warning symbols

2.3 Product specific safety notes

Your weigh module meets the state of the art technology and complies with all recognized safety rules,
however, certain hazards can arise.
Do not open the weigh module: It does not contain any parts which can be maintained, repaired or replaced
by the user. If you ever have problems with your weigh module, contact your authorized METTLER TOLEDO
dealer or service representative.
Observe instructions
Always operate and use your weigh module only in accordance with the instructions contained in the
product documentation. The instructions for setting up your weigh module must be strictly observed.
If the weigh module is not used according to the product manuals, protection of the weigh module may
be impaired and METTLER TOLEDO assumes no liability.
Staff safety
Use only METTLER TOLEDO accessories and peripheral devices, these items are designed to work optimally
with your weigh module.
Explosion hazard
It is not permitted to use the weigh module in explosive atmospheres of gases, steam, fog, dust and
flammable dust (hazardous environments).
4 Safety Information​ ​
for a hazardous situation with medium risk, possibly resulting in death or severe
injury if not avoided.
for a hazardous situation with low risk, resulting in minor or moderate injury if not
avoided.
for a hazardous situation with low risk, resulting in damage to the instrument, other
material damage, malfunctions and erroneous results, or loss of data.
(no symbol)
for useful information about the product.
General hazard Electrical shock
Weigh Modules