Philips AZ series Bedienungsanleitung Seite 13

PROG P – programming of tracks (max. 99 tracks)
1 Select the desired track with PREV ∞ or NEXT §.
2 As soon as the desired track is displayed, press the PROG button to store the track
in the memory.
Display indication: track number
y y
/ P / total number of stored tracks, e.g.
Note:
- When you press PROG and there is no track selected,
the display indicates SELECt.
Playing the program:
If you have selected the tracks in STOP mode, press the PLAY/PAUSE 2; button.
If you have selected the tracks during CD play, first press STOP 9 and then the
PLAY/PAUSE 2; button.
Display indication: PROGRAM.
y y
Your program will be played in the selected playing mode (e.g. SHUFFLE).
y y
Reviewing the settings:
Press the PROG button for more than 2 seconds.
Display indication: each stored track successively flashes for a short moment.
y y
Erasing the program in STOP mode:
Press the STOP 9 button to erase the program.
PROGRAM disappears on the display and your program is erased.
y y
CLEAR lights up briefly on the display.
y y
Note: Interrupting the power supply or opening the lid will erase the program.
OPERATION
PROG
13