Removing The Cd - Philips AZ series Bedienungsanleitung

OPERATION
Inserting the CD
• Push gently on
the CD center
so that it fits
onto the hub.
Playing a CD
1 Open the lid by pushing the OPEN slide control to the side.
2 Insert an audio CD, printed side up. Push down on the left-
hand side to close the lid.
3 Press the 2; button to start CD play.
Display indication: (example)
y y
1 = current track / 2:56 = elapsed time of current track
4 Adjust the sound using the VOLUME and DBB controls.
5 Interrupt CD play by pressing the 2; button. Continue CD play by pressing the 2;
button again.
Display indication: time of the current position (flashing).
y y
6 Press the STOP 9 button to stop CD play.
Display indication: (example)
y y
17 = total number of tracks / 51:06 = total playing time
If you press the STOP 9 button again, you will switch off the set.
Note: If no button is pressed for 10 seconds, the set will switch off automatically.
10

Removing the CD

• Hold the CD
by its edge
and press the
hub gently.