Charging The Headphones; Function Operation; Pairing With A Phone Or Other Device - BeeWi BBH210 Bedienungsanleitung

1. < key: previous track
2. multifunction button (mFB):
3. > key: next track
4. Indicator lights
5. Adjustable headband

3. CHARGING THE HEADPHONES

make sure that your headphone is fully charged for 2.5 hours before
you start using it. Connect the USB cable provided to your PC and to the
charging connector (7) of the headphone. Use only the USB cable provided
as using other devices may damage your headphone.
When the indicator lights are solid red, your headphone is charging. When
the lights turn off, the headphone is fully charged
4. TURNING ON/OFF yOUR HEADPHONES
Function Operation
Press and hold the mFB for
Turn on 3~5 seconds till the blue
LIGHT blinks.
Press and hold the mFB
Turn off for 3~5 seconds till the red
LIGHT blinks.
Remark: The headphone will turn off automatically if no devices are
connected after 5 minutes in order to save power.

5. PAIRING WITH A PHONE OR OTHER DEVICE

Before you use your headphone you must pair it up with a mobile phone or/
and another Bluetooth enabled device.
1. Put the headphone into pairing mode: when the headphone is turned off,
press and hold the mFB until the indicator light is blinking blue/red.
6. microphone
7. Charging socket
8. (+) key: volume up
9. (–) key: volume down
LIGHT indicator
Blue LIGHT indicator light
for 1 second
Blue LIGHT indicator light
for 1 second
ENGLISH
5