Thermal Cut-Out - Philips HR2860 Bedienungsanleitung

EnglisH
8
- Do not exceed the maximum quantities and processing times
indicated in the table.
- Let hot ingredients cool down before you chop them in the wet mill
or pour them into the blender beaker (max. temperature 80°C).
- Never use the dry mill or wet mill for more than 30 seconds without
interruption.
- Always process cloves, star anise and aniseed in the dry mill together
with other ingredients. If processed separately, these ingredients may
attack the plastic materials of the dry mill
- Do not process dry ingredients such as coffee beans and dried beans
in the wet mill.
safety features
Built-in safety lock
This feature ensures that you can only switch on the appliance if the
beakers have been placed on the motor unit in the correct position.
When the beakers have been assembled correctly, the built-in safety lock
is unlocked.

thermal cut-out

The appliance is equipped with a thermal cut-out that automatically cuts
off the power supply to the appliance if it overheats.
If the appliance suddenly stops running:
1 Pull the plug out of the wall socket.
 Let the appliance cool down for 0 minutes.
 Put the plug in the wall socket.
 Switch on the appliance again.
Contact your Philips dealer or an authorised Philips service centre if the
thermal cut-out is activated too often.
To avoid a hazardous situation due to inadvertent resetting of the
thermal cut-out, never connect this appliance to a timer switch.