Ritter ESM 50 Gebrauchs- Und Montageanleitung Seite 18

English
– Never switch the hand blender
on when you are cleaning
it, connecting or disconnect-
ing its attachments or when
replacing parts or accessories.
Keep your fingers away from
the buttons to prevent the
appliance from switching on
accidentally. Never touch the
blades on the attachments, as
these are very sharp.
– Food may splash out of the
cup during processing. For this
reason, allow hot food to cool
before processing to avoid
scalding.
Overview of LED display (6)
LEDs
Hand off
blender in
LEDs flash in sequence from left to
charging
right
station
all LEDs flash simultaneously
Hand 1, 2, 3 or 4 LEDs light up
blender not
in charging
LED 1 flashes slowly (1 s on/1 s off)
station
LED 1 flashes rapidly (0.1 s on/1 s off)
all 4 LEDs flash slowly
(1 s on/1 s off)
12
– If using the hand blender in a
saucepan, remove the sauce-
pan from the hot plate before
processing.
– Ensure that the slot on the
attachment you are using is
sitting squarely and firmly on
the drive shaft pin. If attach-
ments are loose or not firmly
attached to the pin, they must
not be used and must be
replaced.
Risk of explosion
– Protect the battery from expo-
sure to heat and fire.
Description
Battery fully charged
Battery is charging; the last LED to flash indicates
the current battery level
Operator error (appliance is switched on in
charging station)
Appliance is in use; number of LEDs indicates the
current battery level
Battery is dead
Battery is defective (see "CHANGING THE
BATTERY")
Overload protection (see "FUNCTIONS")