Troubleshooting; Specifications - BEABA Mini therm Gebrauchsanweisung

troUbLE shooting
Error
message

spEciFicAtions

• Temperature measurement range:
- Forehead mode: 34~42.2°C (93.2~108°F)
- surface mode: -22~80°C (-7.6~176°F)
• Operating temperature range: 10~40°C (50~104°F)
• Storage temperature range: It should be stored at room temperature between
-20~+50°C, RH ≤ 85%. Transportation temperature shall be less than 70°C, RH ≤ 95%.
• Comply with ASTM E1965-98, IEC/EN60601-1-2(EMC), IEC/EN60601-1(Safety) standards.
• Accuracy:
- Forehead mode: ±0.3°C (0.5°F)
- surface mode: +/-0.3°C (0.5°F) within 22~42.2°C (71.6~108°F), others +/-4%
e Mini therm 90x120 v2.indd 16
problem
Error 5~9, the system is not functioning
properly.
Measurement before device
stabilization.
The device showing a rapid ambient
temperature change.
The ambient temperature is not within
the range between 10°C and 40°C
(50°F~104°F).
in forehead mode: Temperature taken
is higher than +42.2°C (108°F)
in surface mode: Temperature taken
is higher than +80°C (176°F)
in forehead mode: Temperature taken
is lower than +34°C (93.2°F)
in surface mode: Temperature taken
is lower than –22 C (-7.6°F)
Device cannot be powered on to the
ready stage.
or +/-2°C (4°F) whichever is greater.
solution
Unload the battery, wait for 1
minute and repower it. If the
message reappears, contact the
retailer for service.
Wait until all the icons stop
flashing.
Allow the thermometer to rest in
a room for at least 30 minutes
at room temperature: 10°C and
40°C (50°F~104°F).
Please select the target within
specifications.
If a malfunction still exists, please
contact the nearest retailer.
Change with a new battery.
16
24/07/13 10