Cleaning And Maintenance - Genius Home BBA3001 Bedienungsanleitung

Let the bread pan cool down before removing the bread. Then use non-stick spatula to gently
•
loosen the sides of the breadfrom the pan.
Turn bread pan upside down onto a wire cooling rack or clean cooking surface and gently shake
•
until bread falls out onto rack.
Remove the bread carefully from the pan and cool for about 20 minutes before slicing.
•
If you are out of the room or have not pressed START/STOP button at the end of operation, the
•
bread will be kept warm automatically for 1 hour and then shut power supply down.
When do not use or completely operation, unplug the power cord.
•
Note: Before slicing the loaf, use the hook to remove out the Kneading blade hidden on the
bottom of loaf. The loaf is hot, never use the hand to remove the kneading blade.
Special introduction
For Quick breads
Quick breads are made with baking powder and baking soda that activated by moisture and heat.
For perfect quick breads, it is suggested that all liquids be placed in the bottom of the bread pan,
dry ingredients on top. During the initial mixing of quick bread batters and dry ingredients may col-
lect in the corners of the pan, it may be necessary to help machine mix to avoid flour clumps. If so,
use a rubber spatula.

Cleaning and Maintenance

Disconnect the machine from the power and let it cool down prior to cleaning.
bread pan: Rub inside and outside with a damp cloth. Do not use any sharp or abrasive agents for
the consideration of protecting the non-stick coating. The pan must be dried completely prior to
installing.
kneading blade: If the kneading bar is difficult to remove from the axle, In such an event fill the
Container with warm water and allow it to soak for approx.30minutes.The kneader can then be eas-
ily removed for cleaning. Also wipe the blade carefully with a cotton damp cloth, Please note both
the bread pan and kneading blade are dishwashing safe components.
Housing: gently wipe the outer surface of housing with a wet cloth. Do not use any
Abrasive cleaner to clean as this would degrade the high polish of the surface. Never immerse the
housing into water for cleaning.
Before the bread maker is packed away for storage, ensure that it has completely cooled
Down, is clean and dry, and the lid is closed.
15