Installation Guide - Instar In-Poe 4000 Handbuch

Installation Guide

1. Before installation, please check the following list:
1. whether the PoE port power meets the power requirement of the powered devices.
2. whether the PoE standard requirement and power supply match with the powered devices.
IN-PoE 4000 powers through pin 4/5 (+) and 7/8 (-)
3. whether the power output of the power adapter is consistent with the specification written on the
lable of this PoE switch.
2. Please install the PoE switch according to the following steps:
1. place the PoE switch on the flat, not burnable and stable surface.
2. plug the power adapter into the power socket and then connect it with the PoE Switch
3. connect the network devices to the PoE switch port through a network cable.
*
Note
Please do not put heavy objects on the PoE switch, and please ensure good ventilation environment for the PoE switch. Please
cut off the power first before plugging the power adapter.
3. Power
Connect the power adaptor to the switch. When the power is connected, the switch will automatically
initialize, at this time, the following cases will occur for the LED lights:
1. Except for the PoE port LEDs, all the other LEDs will light up shortly and then turn off, which means
the system is now successfully restored.
2. Power LED remains on.
*
Note
If initialization is inconsistent with the above, please check the power adapter.
INSTAR Deutschland GmbH
-6
EN