Indicator Description - Instar In-Poe 4000 Handbuch

Indicator Description

Indicator
Power Indicator: P
PoE Indicator: PoE
(Green LED)
Link Indicator: LINK
(Yellow LED)
*
Note
Please confirm that your powered device are complying with IEEE802.3af/at standard.
Priority Function: this function will protect device in case of overloaded, if the total power consumption of all powered devices
are higher than specified, the ports of IN-PoE 4000 Switch will be sorted by prirority ranking from highest priority (Port 1) to lowest
priority (Port 4), and the power supply of lowest priority will be turned off.
Power Port, Power adapter: Please use the included power supply. The PoE switch will be damaged if using a mismatched
power supply; Use the power supply only on a AC110-245V/50Hz power socket.
INSTAR Deutschland GmbH
Status Description
ON Working
OFF Power OFF
ON Powered Device Connected and Working Properly
Blinking Short Circuit or Currrent Overload
OFF No connected Powered Device or no Power Supply
Blinking Data Transmision OK
ON Connected with 10Mbps, 100Mbps
OFF No connected Powered Device
-4
EN