Rosenbauer RLS1000 Bedienungsanleitung Seite 25

RLS1000 - Rosenbauer
Construction
The RLS1000 has been constructed using high quality materials to produce a tough,
long lasting product for the professional user. High impact engineering polymers
combined with stainless steel fittings ensure the RLS1000 is impervious to everyday
knocks and bangs. The RLS1000 employs an internal steel chassis to retain the
battery. This construction ensures a very strong, robust and reliable product.
Additional height
The overall lamp head height can be increased to 1800mm by using four of the
quicklok extension poles, which store conveniently in the base of the RLS1000. Simply
slot and twist the poles together to create a quick extension pole system. With the in-
built stability legs this creates a unique compact self-contained tripod system.
On board charging
The integrated charging system gives the user the option of charging from a 12 or 24 volt
DC vehicle system without the need for additional equipment in the vehicle.
The unit has a multi-coloured LED to show the state of
charging. At initial connection to the power supply the
GB
charge indication LED will flash twice green then twice red
then twice green again in a self test process to show all is
ok. A constant red LED shows bulk charging and when the
red LED starts to flash this shows the battery is approx. 80%
charged, when the LED turns to green the battery is then
fully charged and ready for use. The charger only needs a
Bi-Coloured LED
simple cable (included) from the vehicle to any one of the
two multifunction sockets on the rear of the LED worklight.
The charger also employs a 'vehicle battery protect system' which prevents over
discharge of the main supplying vehicle's battery. In addition the integrated
charger can measure the battery's ambient
temperature and adjust the charging profile to
suit. This unique process ensures the battery is
charged to full capacity even when used in temperatures outside of the 'normal' 25ºC
for 100% capacity.
25