Rosenbauer RLS1000 Bedienungsanleitung Seite 18

Rosenbauer - RLS1000
RLS1000
Rechargeable LED worklight
OPERATING INSTRUCTIONS
Thank you for purchasing the Rosenbauer High Performance LED Worklight. This
product represents the latest technology in LED portable lighting, is designed to be
virtually maintenance free and is suitable for use in a harsh work environment.
OPERATION - QUICK START
Although the LED worklight is full of features it is still
simple to use. When the unit is packed down in torch/
storage mode the (on/off) switch is recessed to prevent
accidental switch on, yet is still accessible to the user
when needed.
Press once to switch on and press and hold to switch off. Whenever the unit is first
switched on it will default to the 100% brightness setting regardless of how the unit
was last used. At switch on you will hear a bleep from the unit to signal all is well, the
battery status LED, near to the on/off switch, will illuminate to show the units state of
charge. When switching off, press and hold the on/off switch for 2-3 seconds. This is to
prevent accidentally switching off of the unit.
Always remember to put your LED worklight on charge after use to prolong the life of
the high capacity rechargeable battery.
CHARGING YOUR LED WORKLIGHT
Whichever power source you have selected to recharge your LED worklight, it was
designed to be left connected indefinitely to the battery unit so your lighting product is
always topped up and ready for use. Your LED worklight can be charged and run at the
same time.
18