Rosenbauer RLS1000 Bedienungsanleitung Seite 23

RLS1000 - Rosenbauer
The next change is when the LED
indicator changes from amber to
red; here again the user will hear an
audible bleep and see a blink of the
main LEDs to signal another change
nearer to the end of battery
duration.
Finally the indicator LED will change
from constant red to flashing red
where upon the lamp brightness will
default from any of the power
settings down to 25%, the beeper
will then sound every 30 seconds
and at the same time the main LEDs
will blink once. This process will
continue until the battery voltage
falls to a point where the unit will
automatically switch off. This
process will give users adequate
time (approx. 15 minutes) to retreat
to an area of safety without being
GB
left in the dark.
The light should not be switched back on until the battery has been recharged to
prevent deep discharge and possible irreversible damage to
the battery.
Performance
The LED worklight uses 30 high power LED's to produce
a crisp white light ideal in a working environment. To
efficiently harness and project the light, this unit has a
bespoke lens array with the addition of an infinitely
variable focusing system. In addition, conscious of the
lack of an infinite power source, we have developed a
market leading LED driver system to ensure very little
energy is wasted with the majority being converted to
light to give a better, brighter light for longer.
23