Wheel Assembly - Mountain Buggy swift Bedienungsanleitung

Wheel Assembly

Front Wheel Assembly
1. Holding both knobs at the same time, unscrew and
pull out the front axle.
2. Insert the front wheel.
to secure wheel in place.
To remove
Tracking device (terrain only)
1. Swivel front wheel straight ahead in the lock
forward position.
2. Loosen knobs on both sides of front wheel.
adjust wheel position, so it runs in a straight line.
Rear Wheel Assembly
push the axles out slightly and release the tab.
2. all buggies:
onto the axles.
Pull on the wheel to ensure it is secure.
To remove
Depress quick release clip and slide wheel o axles. swift,
urban jungle and terrain axles can be pushed in to reduce
axles in until they click into place.
axle
tracking
adjustor