General Safety Instructions; Special Product Features - LaserLiner SuperPlane-Laser 3D Bedienungsanleitung

Read the operating instructions and the enclosed brochure "Guarantee and additional notices"
!
completely. Follow the instructions they contain. This document must be kept in a safe place
and if the laser device is passed on, this document must be passed on with it.
Three-dimensional laser with a horizontal and two vertical 360° laser circles and
slope function for aligning tiles, wall studding, windows, doors etc.

General safety instructions

– The device must only be used in accordance with its intended purpose and within the scope
of the specifications.
Do not stare into the beam!
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should shut their eyes and
immediately move away from the beam.
– Under no circumstances should optical instruments (magnifying glass, microscope, binoculars)
be used to look at the laser beam or reflections.
– Do not use the laser at eye level (1.40 ... 1.90 m)
– Reflective, specular or shiny surfaces must be covered whilst laser devices are in operation.
– In public areas shield off the laser beam with barriers and partitions
wherever possible and identify the laser area with warning signs.
– Tampering with (making changes to) the laser device is not permitted.
– This device is not a toy - keep out of the reach of children.

Special product features

Automatic alignment of the device with a magnetically dampened pendulum system.
The device is brought into initial position and aligns itself autonomously.
Transport LOCK: The device is protected with a pendelum lock during transport.
Devices with PowerBright technology have special high-performance diodes to produce
super bright laser lines. These remain visible over longer distances, in bright ambient light
and on dark surfaces.
Number and direction of the lasers
H = horizontal laser / V = vertical laser / S = Slopefunction
1H360° 2V360°
06
EN
Laser radiation!
Class 2 laser
< 1 mW · 650 nm
EN 60825-1:2014
S