Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3 | PREPARATION FOR PUTTING INTO OPERATION
3.1 | UNPACKING AND INSPECTING THE CONTENTS
In the packaging of machines with the high-dump grass catcher, you will find:
(1) Crate cover
(2) Ramps (attention – these are not included!)
(3) Steering wheel
(4) Seat
(5) Front ballast
3.1a
(6) Documentation (packed parts list, user's manual for the riding mower,
user's manual for the engine, user's manual for the battery, service log book)
3.3.3 High-dump grass catcher
For transportation reasons, the lid, grass catcher and the front ballast are removed. Reassemble
as follows:
Place the grass catcher on to the rotating point of the suspension consoles on the rear
plate of the high-dump mechanism.
3.3.3a
Attach the linear actuator to the frame inside the grass catcher using pins and cotter
pins. Attach it to the hole nearest to the grass catcher suspension consoles.
3.3.3b
Screw the lid on to the grass catcher frame.
3.3.3c
Using the supplied nuts and bolts, screw the ballast to the left and right side of the
machine's frame at the front underneath the bumper bar.
3.3.3d
16
Werbung
