Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The user's manual for the operation of the STARJET UJ102 4x4 riding mowers is supplemented
with and amended by the VK400 High-dump grass catcher in the following chapters as follows:
1.1 | APPLICATION
1.1.1 High-dump grass catcher
The VK 400 High-dump grass catcher is designed to be attached to UJ 102 4x4 riding mowers and
serves to collect grass clippings and then lift them up to the necessary height to be dumped out on
to a transport vehicle or into a container. The grass catcher is lifted by means of a hydraulic motor
connected to the internal hydraulic system of the mower's gear box. The grass catcher is dumped
out by an electric linear actuator. The functions of the grass catcher are controlled using a switch-
controlled electronic system.
1.2 | MAIN PARTS OF THE RIDING MOWER
1.2.1 Main parts of the high-dump grass catcher
(1) Grass catcher
(2) Rear plate with holders
(3) Linear motor
(4) Moving rails
(5) Energy chain and electro-bundle
(6) Fixed rails
(7) Hydraulics and control panel
1.2.1
(8) Fixed cover
(9) Cover with chute and braces
(10) Control unit (module)
(11) Front ballast
(12) Chute scraper
1.3 | PRODUCT IDENTIFICATION LABEL AND OTHER LABELS WITH SYMBOLS
USED ON THE MACHINE
Labels on the high-dump grass catcher
Danger
It is permitted
to use the lifting
load for the lifting
mechanism up to
an incline of 4°
leave the grass
The maximum
raised position
it is necessary
mechanism is
to mechanically
60 kg.
secure the grass
catcher against it
13
In order to
catcher in the
Reversing with
catcher is only
permitted at a low
falling.
a lifted grass
speed
Werbung
