Hama 136697 Bedienungsanleitung Seite 15

10. Retrieving the recorded material
Note
Do not remove the microSD card with the Dashcam switched on. This can result in data loss or cause
damage to the device.
• Switch off the Dashcam as described in 7.2 Switching on/off.
• Remove the camera's microSD card.
• Connect the microSD card to your PC using the SD card reader (included in delivery).
• Transfer the stored data to your PC to free up space on the memory card.
11. Save button
Note
In the event of an accident, the administering of first aid and the safety of all involved have priority.
Note
• With the G-sensor activated – as described in Section 9.10 G-sensor – the video file is
automatically saved and overwriting of this data is prevented when the camera senses vibrations
(for example, in the case of an accident).
• If the sensor's vibration sensitivity setting is too low, it can happen that the data is not saved
despite vibration. To be on the safe side, save your data manually with the Save button.
To be sure your data is permanently stored, proceed as follows:
• Press the Save button (13). Auf dem Display erscheint
• Press and hold Power [
• Now remove the camera's microSD card.
Note
• Videos stored after pressing the Save button are stored under the designation 'LOKXXXXX'.
• Normal video files are stored under the designation 'MOV' and a consecutive number.
] (10) for about 3 seconds to switch off the camera.
appears on the display.
13