Personal Safety; Transport And Storage - Husqvarna PP 455 E Bedienungsanweisung

Personal safety

• Never use the machine if you are fatigued, while under the
influence of alcohol or drugs, medication or anything that
could affect your vision, alertness, coordination or
judgement.
• Prevent unintentional starting. Ensure the switch is in the
OFF-position.
• Never leave the machine unsupervised with the motor
running.
• Always unplug the machine during longer work breaks.
• Never work alone, always ensure there is another person
close at hand. Apart from being able to receive help to
assemble the machine, you can also get help if an
accident should occur.
• People and animals can distract you causing you to lose
control of the machine. For this reason, always remain
concentrated and focused on the task.
• People that need to be in close proximity of the machine
must wear hearing protection as the sound level when
cutting exceeds 85 dB(A).
• Always saw in a manner that permits easy access to the
emergency stop.
Use and care
• This machine is only intended for use together with a
Husqvarna WS 355, WS 463, WS 462, WS 460 and CS
2512. All other use is forbidden.
• The machine is intended for use in industrial applications
by experienced operators.
• Inspection and/or maintenance should be carried out with
the motor switched off and the plug disconnected.
• Always switch off the machine before you move it.
• Observe care when lifting. You are handling heavy parts,
which imply the risk of pinch injuries or other injuries.
• Check that all couplings, connections and cables are
intact and free from dirt.
• Check that all cables and the water supply are correctly
connected to the machine before starting it.
• Never pull out the power cable without first switching off
the power pack and waiting for the engine to come to a
complete halt. If an emergency situation should arise
anyway, push the red emergency stop button on the power
pack or the stop button on the remote control.
• Keep all parts in good working order and ensure that all
fixtures are properly tightened.
10 –
English
OPERATING

Transport and storage

• Always switch of the power pack and pull out the electric
cable before moving the equipment.
• Use the cases provided to store the equipment.
• Secure the equipment during transportation in order to
avoid transport damage and accidents.
• Store the equipment in a lockable area so that it is out of
reach of children and unauthorized persons.
• Store the machine and its equipment in a dry and frost
proof place.
• Do not expose the machine to temperatures exceeding
45°C or to direct sunlight.