Control Panel; Demo Mode - Electrolux WK4PL10CN Bedienungsanleitung

4.

CONTROL PANEL

ON/OFF key
1
Light key
2
3 Display
4.1 On/Off switch and
temperature setting
To switch on the appliance press the ON/
OFF key.
The display shows the set default tem-
perature (12°C).
The temperature can be adjusted from 5°
to 20°C (with steps of 1°C) by touching
the -/+ key.
To switch off the appliance press the ON/
OFF key for 5 seconds.
4.2 Light Key
When the door is opened, the LED light is
on, when closed is off. If you want to keep
the light on with the door closed, open the
door, and press the light key.
If you want to restore the standard condi-
tions, press the light key again.
4.3 Display
The display shows the temperature set,
the error messages, if the demo mode is
selected, if the keys are locked.
1 2 3 4
Temperature colder key
4
Temperature warmer key
5
4.4 Lock keys mode
Press the + key and the light key for 3
seconds to activate the lock keys mode.
The appliance will continue to work with
the last settings.
To deactivate the lock keys mode, do the
same procedure.
By selecting this function, the message
"bl" appears on display touching any key.
4.5

Demo Mode

DEMO MODE has been created for exhi-
bitions and showroom purposes.
The display will be ON with possibility to
change the temperatures but the Cooling
motor will be OFF.
To activate or deactivate the DEMO
MODE, Press + and – simultaneously for
3 seconds.
Display will show the ON for 5 seconds,
then the temperature will be showed
again.
It Is possible to keep the inner led light
turned ON also when the door is closed.
Press the Light key to activate the light
ON mode.
ENGLISH
5
7