Setting A Programme - AEG LAVAMAT 75460TL1 Benutzerinformation

10.5 Liquid or powder
detergent
CLICK
1.
3.
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.

10.6 Setting a programme

1. Turn the programme knob and set
the programme:
• The related programme indicator
comes on.
• The indicator of Start/Pause
flashes.
• The display shows: the default
temperature, the spin speed, the
indicators of the programme
phases and the programme
duration.
2. If necessary, change the
temperature, the spin speed, the
cycle duration, or add available
options. When you activate an
option, the indicator of the set
option comes on.
2.
CLICK
4.
10.7 Starting a programme
without the delay start
Press button Start/Pause to start the
programme.
The relevant indicator stops to flash and
stays on.
On the display the indicator of the phase
is operation starts to flash.
The programme starts, the lid is locked.
The display show the indicator
A
If you set something
incorrect, the display shows
the message Err.
The drain pump can operate
for a short time when the
appliance fills water.
ENGLISH 15
B
.