Setting A Programme - AEG L6TB61379 Benutzerinformation

2. Put the detergent and the fabric
conditioner into the proper
compartments.
Always obey the instructions
that you find on the
packaging of the detergent
products.
CLICK
1.
3.
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.

10.5 Setting a programme

1. Turn the programme knob and set
the programme:
• The related programme indicator
comes on.
• The indicator of Start/Pause
flashes.
• The display shows: the default
temperature, the spin speed, the
indicators of the programme
phases and the programme
duration.
10.4 Liquid or powder
detergent
2.
CLICK
4.
2. If necessary, change the
temperature, the spin speed, the
cycle duration, or add available
options. When you activate an
option, the indicator of the set
option comes on.
A
In case a selection is not
possible , no indicator
comes on and an acoustic
signal sounds.
ENGLISH 17
B