Inhaltsverzeichnis
Werbung
OS
- Microsoft
/ Vista
Certifications
- FCC, CE, WHQL
* For detailed product information, please visit our website: http://www.asrock.com
WARNING
Please realize that there is a certain risk involved with overclocking, including
adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using
the third-party overclocking tools. Overclocking may affect your system stability, or
even cause damage to the components and devices of your system. It should be
done at your own risk and expense. We are not responsible for possible damage
caused by overclocking.
CAUTION!
1.
This motherboard supports Untied Overclocking Technology. Please read
"Untied Overclocking Technology" on page 29 for details.
2.
This motherboard supports Dual Channel Memory Technology. Before
you implement Dual Channel Memory Technology, make sure to read
the installation guide of memory modules on page 13 for proper
installation.
3.
Whether 1066MHz memory speed is supported depends on the AM2+
CPU you adopt. If you want to adopt DDR2 1066 memory module on this
motherboard, please refer to the memory support list on our website for
the compatible memory modules.
ASRock website
4.
Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows
and Windows
®
Vista
64-bit with 64-bit CPU, there is no such limitation.
5.
The maximum shared memory size is defined by the chipset vendor
and is subject to change. Please check NVIDIA
information.
6.
1080p Blu-ray (BD) / HD-DVD playback support on this motherboard re-
quires the proper hardware configuration. Please refer to page 9 and 10 for
the minimum hardware requirement and the passed 1080p Blu-ray (BD) /
HD-DVD films in our lab test.
7.
This DVI-D port for the chipset adopted on this motherboard can support
DVI/HDCP and HDMI format signal. You may use the DVI to HDMI adapter to
convert this DVI-D port to HDMI interface. DVI to HDMI adapter is not bundled
with our product, please refer to the adapter vendor for further information.
8.
Before installing SATAII hard disk to SATAII connector, please read the "SATAII
Hard Disk Setup Guide" on page 31 of "User Manual" in the support CD to
adjust your SATAII hard disk drive to SATAII mode. You can also connect
SATA hard disk to SATAII connector directly.
9.
Power Management for USB 2.0 works fine under Microsoft
TM
Vista
64-bit / Vista
ASRock
®
®
Windows
XP / XP Media Center / XP 64-bit / Vista
TM
64-bit compliant
http://www.asrock.com
TM
. For Windows
®
XP 64-bit and Windows
®
TM
/ XP 64-bit / XP SP1 or SP2.
K10N78M
Motherboard
TM
®
XP
®
Vista
TM
website for the latest
®
®
Windows
7 7 7 7 7
Werbung
Inhaltsverzeichnis
