ASROCK K10N78M Handbuch Seite 17

Step 4. Boot into OS. Install Hybrid SLI
TM
Hybrid SLI driver is in the following path of ASRock support CD:
(There are two ASRock support CD in the motherboard gift box pack, please
choose the one for Windows
..\Drivers\Hybrid SLI driver\Vista
* Currently, Hybrid SLI
website for future update.
Step 5. Restart your computer. Then you will find the Hybrid icon on your Windows
taskbar.
Step 6. The default setting is GeForce
need to adjust the setup anymore.
B. HybridPower B. HybridPower
B. HybridPower B. HybridPower B. HybridPower
TM TM TM TM TM
Step 1. Install one compatible PCI Express graphics card to PCIE2 slot (green). For
the proper installation procedures, please refer to section "Expansion Slots".
Step 2. Boot your system. Press <F2> to enter BIOS setup. Enter "Advanced" screen,
and enter "Chipset Settings". Then set the option "Hybrid SLI" to [256MB] or
[512MB]. And set the option "Primary Graphics Display" to [Onboard].
Step 3. Save your BIOS change and exit BIOS setup.
Step 4. Power off your system.
Step 5. Connect the monitor cable to the correspondent connector on the I/O shield.
Step 6. Boot into OS. Install Hybrid SLI
Hybrid SLI TM driver is in the following path of ASRock support CD:
(There are two ASRock support CD in the motherboard gift box pack, please
choose the one for Windows
..\Drivers\Hybrid SLI driver\Vista
* Currently, Hybrid SLI
website for future update.
Step 7. Restart your computer. Then you will find the Hybrid icon on your Windows
taskbar. Please click the icon and select the item "Save Power".
ASRock
TM
driver from our support CD to your system.
® TM TM
Vista / Vista 64-bit.)
TM TM
driver only has Vista 32 version, please visit our
®
Boost mode (Boost Performance). You do not
TM
driver from our support CD to your system.
® Vista TM / Vista TM 64-bit.)
TM driver only has Vista TM 32 version, please visit our
K10N78M Motherboard
®
®
1 7 1 7 1 7
1 7 1 7