Herunterladen Inhalt Inhalt Diese Seite drucken

Electrolux PerfectMix ESB23 Serie Gebrauchsanweisung Seite 8

Blender
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 21
TROUBLESHOOTING
PROBLEM
The appliance does not work:
The blade unit is blocked:
The motor unit gives an
unpleasant smell during the
first few times:
The appliance makes a lot of
noise:
The appliance smells, feels hot
to touch, emits smoke, etc.
The blender leaks:
DISPOSAL
This symbol on the product indicates that this product contains a battery which shall not be disposed with
normal household waste.
This symbol on the product or on its packaging indicates that the product may not be treated as household
waste. To recycle your product, please take it to an official collection point or to an Electrolux service center
that can remove and recycle the battery and electric parts in a safe and professional way. Follow your
country's rules for the separate collection of electrical products and rechargeable batteries.
Electrolux reserves the right to change products, information and specifications without notice.
www.electrolux.com
ESB23XX_Blender_Electrolux_No-Farsi.indd 8
SOLUTION
Check whether the parts have been assembled properly.
Pull the plug out of the wall socket and let the appliance cool down for 30
minutes. Then put the plug back into the wall socket and switch the appliance
on again.
Switch the appliance off and process a smaller quantity.
Switch the appliance off and dislodge the food from the blades with a spatula.
This is normal. If the appliance continues to give this smell after you have used it
a few times check whether the quantity you are processing and processing time
are correct.
Make sure the lid and the stopper are properly placed and the sieve in the lid is in
front of the spout of the jug.
Switch the appliance off and process a smaller quantity or reduce the operating
time.
Make sure the breaker has been properly attached.
Switch the appliance off and process a smaller quantity.
Unplug the appliance. Remove the blade assembly and make sure the rubber
ring has been properly placed onto the blade assembly.
8
2017-07-13 14:29:01

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis