Beper 90.455 Betriebsanleitung Seite 10

Hand Blender with Cup Use instructions
Before first use
Thoroughly clean the parts that come into contact with food before you use the appliance for the first
time (see chapter 'Cleaning').
Preparing for use
1 Let hot ingredients cool down before you chop them, blend them or pour them into the beaker
(max. temperature 80°C).
2 Cut large ingredients into pieces of approx. 2cm before you process them.
3 Assemble the appliance properly before you put the plug in the wall socket.
Using the appliance
The hand blender is intended for:
-- blending fluids, e.g. dairy products, sauces, fruit juices, soups, mixed drinks and shakes.
-- mixing soft ingredients, e.g. pancake batter or mayonnaise.
-- pureeing cooked ingredients, e.g. for making baby food.
1 Put the ingredients in the beaker.
2 Attach the blender bar to the motor unit ('click').
3 Put the plug in the wall socket.
4 Immerse the blade guard completely in the ingredients.
5 Press the on/off button or the turbo speed button to switch on the appliance.
-- When you use the on/off button, you can adjust the speed with the speed selector. The higher
the speed, the shorter the processing time required.
-- When you use the turbo speed button, the appliance operates at maximum speed. In this case,
you cannot adjust the speed with the speed selector.
Note: The higher the speed, the shorter the processing time required.
6 Move the appliance slowly up and down and in circles to blend the ingredients.
Cleaning
Do not immerse the motor unit in water.
1 Unplug the appliance.
2 Press the release buttons on the motor unit to remove the accessory you have used.
3 Disassemble the accessory.
Tip: You can also remove the rubber rings from the chopper bowls for extra thorough cleaning.
4 See the separate cleaning table at the end of this user manual for further instructions.
Tip: For quick cleaning, pour warm water with some washing-up liquid in the beaker, insert the blen-
der bar and let the appliance operate for approx. 10 seconds.
10