Epson TM-T70II-DT Benutzerhandbuch Seite 15

Specifications
Item
CPU
Memory Main memory
BIOS ROM
Chip set
Video controller
Backing storage
Interface Ethernet
USB
Serial
VGA
DisplayPort
(only for the high
model)
Drawer-kick
Audio functions
RTC/CMOS Backup battery
Speaker
Printer unit Print method
Print speed
Software BIOS
Operating system*
Device control
software
Power supply
Current consumption
Temperature
Humidity
Overall dimensions
Mass
* Capacity of SATA SSD and operating system differ depending on the model.
®
High model: Intel Atom™ N2800 (1 MB Cache, 1.86 GHz)
Low model: Intel ® Atom™ N2600 (1 MB Cache, 1.6 GHz)
High model: 4 GB, DDR3-1066 SO-DIMM slot
Low model: 2 GB, DDR3-800 SO-DIMM slot
SPI Flash 4 MB
Intel ® MN10
Built-in CPU
SATA SSD (16 GB or more)*
10BASE-T/100BASE-TX/1000Base-T 1port (RJ-45)
Support Wake On LAN
Network boot
External: x 6 (Compliance: USB 2.0)
× 1 (D-sub 9 pin male)
× 1 (D-sub 15 pin female)
× 1 (Standard displayport connector 20 pin female)
× 1 (RJ12 6 pin)
Sound output to the built-in speaker
External line-out
Lithium battery for RTC backup
Built-in monaural speaker
Thermal line printing
250 mm/s
AMI BIOS (ACPI 2.0/APM 1.2/Plug&Play-ready)
Windows Embedded POSReady7, Windows Embedded
POSReady 2009, or Linux
ePOS-Device
USB port controller (thin-client connection supported)
Dedicated AC adapter (AC adapter,T [Model: M284A])
DC 24 V, 4.2 A
13 w (when not printing)/47 w (when printing)
Operating: 5 to 40°C {41 to 104°F}
Storage: –10 to 50°C {14 to 122°F}
Operating: 10 to 90 %RH (No condensation)
Storage: 10 to 90 %RH (No condensation)
172 × 290 × 114 mm {6.77× 11.42 × 4.49"} (W × D × H)
(Connector cover included)
Approx. 2.8 kg {6.17 lb}
TM-T70II-DT User's Manual 10
Specification
®
based on openSUSE