Philips AVENT SCF860 Handbuch Seite 12

EngliSh
12
Problem
The wet mill
vibrates strongly,
produces a lot of
noise or the blade
unit is out of
alignment.
The wet mill leaks.
Possible cause
The sealing ring is not or not
properly placed in the blender
beaker lid.
There is too much food in the
blender beaker.
You have not assembled the
blade unit properly onto
the wet mill beaker.
The food in the wet mill
beaker blocks the blades.
The sealing ring is not or not
properly placed on the blade
unit.
Solution
Put the sealing ring properly in the
blender beaker lid.
Switch off the appliance and process a
smaller quantity.
Screw the blade unit properly onto
the wet mill beaker.
Remove the food that blocks the blade
and/or process a smaller quantity.
Unplug the appliance. Remove the blade
unit and assemble the rubber
ring properly onto the blade unit.