Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.10
2.10
2.10 Driver Installation Guide
Driver Installation Guide
Driver Installation Guide
Driver Installation Guide
2.10
2.10
Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom
side to install those required drivers. Therefore, the drivers you install can work
properly.
2.11
2.11
2.11 Installing Windows
Installing Windows
Installing Windows
Installing Windows
2.11
2.11
Installing Windows
Vista
Vista
Vista
Vista
Vista
64-bit With RAID Functions
64-bit With RAID Functions
64-bit With RAID Functions
64-bit With RAID Functions
64-bit With RAID Functions
TM
TM
TM
TM
TM
If you want to install Windows
/ SATAII HDDs with RAID functions, please refer to the document at the following path
in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.12
2.12 Installing Windows
2.12
Installing Windows
Installing Windows
Installing Windows
2.12
2.12
Installing Windows
Vista
Vista
Vista
Vista
Vista
64-bit Without RAID Functions
64-bit Without RAID Functions
64-bit Without RAID Functions
64-bit Without RAID Functions
64-bit Without RAID Functions
TM
TM
TM
TM
TM
If you want to install Windows
®
TM
Windows
Vista
64-bit OS on your SATA / SATAII HDDs without RAID functions,
please follow below procedures according to the OS you install.
2.12.1 Installing Windows
2.12.1 Installing Windows
2.12.1 Installing Windows
2.12.1 Installing Windows
2.12.1 Installing Windows
Functions
Functions
Functions
Functions
Functions
If you want to install Windows
HDDs without RAID functions, please follow below steps.
Using SATA / SATAII HDDs with NCQ and Hot Plug functions
STEP 1: Set Up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set the "SATA Operation Mode" option to [AHCI].
STEP 2: Make a SATA / SATAII driver diskette.
A.
Insert the ASRock Support CD into your optical drive to boot your system.
(There are two ASRock Support CD in the motherboard gift box pack,
please choose the one for Windows
B.
During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-
ROM as the boot device.
C.
When you see the message on the screen, "Generate Serial ATA driver
diskette [YN]?", press <Y>.
D.
Then you will see these messages,
2 8
2 8
2 8
2 8
2 8
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
®
®
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
®
®
XP, Windows
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
®
®
XP or Windows
Advanced screen
®
XP / XP 64-bit.)
ASRock
A780FullHD
Motherboard
/ / / / /
TM
TM
TM
TM
TM
TM
TM
/ Vista
64-bit on your SATA
/ / / / /
TM
TM
TM
TM
TM
®
®
XP 64-bit, Windows
Vista
®
XP 64-bit on your SATA / SATAII
IDE Configuration.
TM
or
Werbung
Inhaltsverzeichnis
