Programming Track Numbers - Philips AZ 1040 Handbuch

Different play modes: SHUFFLE and REPEAT
You can select and change the various play modes before or during
playback. The play modes can also be combined with PROGRAM.
SHUFFLE - tracks of the entire CD/ programme are played in
random order
SHUFFLE and REPEAT ALL - to repeat the entire CD/ programme
REPEAT ALL - to repeat the entire CD/ programme continuously
REPEAT - repeats the current track continuously
1. To select your play mode, press the MODE button before or
during playback until the display shows the desired function.
2. Press PLAY•PAUSE 2; to start playback if in the STOP
position.
3. To return to normal playback, press the MODE button
repeatedly until the various SHUFFLE / REPEAT modes are no
longer displayed.
– You can also press STOP 9 to cancel your play mode.

Programming track numbers

Programme in the STOP position to select and store your CD tracks
in the desired sequence. If you like, store any track more than
once. Up to 20 tracks can be stored in the memory.
1. Use the SEARCH ∞ or § to select your desired track number.
2. Press PROG.
™ Display:
and the selected track number
PROGRAM
appears briefly.
™ If you attempt to programme without first selecting a track
number, is shown.
3. Repeat steps 1-2 to select and store all desired tracks.
™
is displayed if you attempt to programme more than
20 tracks.
4. Press PLAY•PAUSE 2; to start playback of your
CD programme.
Reviewing the programme
In the STOP position or during playback, press and hold down
PROG for a while until the display shows all your stored track
numbers in sequence.
continuously in random order
AZ 1040/00 9
page
CD PLAYER
PROGRAM
9