Pack Contents - Stern Engineering EXTREME LF Serie Installations- Und Wartungsanleitung

Pack coNTENTs

Familiarize yourself with the part names and confirm that the parts are included.
1 X FaucET aND aTTachmENTs
2
1 x 9V transformer
1 x dual power
input box with
inlet nipple and
filter
E V E R S I O N S
1 X FIlTER 1 X allEN kEy
PRE-INsTallaTIoN INFo
CHeCk ContentS
separate all parts from the packaging and check each part with the "Pack contents"
section.
Pay attention to the different models variations.
make sure all parts are accounted for before discarding any packaging material.
If any parts are missing, do not attempt to install your electronic faucet until you obtain the
missing parts.
WarnIngS
Do not install facing a mirror or any other electronic system operated by an infrared sensor.
To prevent reflection problems, it is recommended to keep a minimum distance of 1.50
meters between the faucet and any other objects.
PreParatIon For InStaLLatIon
Flush water supply lines thoroughly before installing the faucet. Do not allow dirt, Teflon
tape or metal particles to enter the faucet.
shut off water supply.
ImPORTANT: All plumbing is to be installed in accordance with applicable codes and
regulations.
REcommENDED holE sIZE
sTaNDaRD VERsIoNs
3