Stern Engineering EXTREME LF Serie Installations- Und Wartungsanleitung Seite 2

INDEX
1
TEChNICAL DATA
2
PACk CONTENTs
3
PRE-INsTALLATION INFO
4-5
INsTALLATION
6-7
sETTINgs ADJUsTmENT
8 BATTERY REPLACEmENT
8 sPARE PARTs LIsT
9 mAINTENANCE
10 LImITED WARRANTY
11 TROUBLEshOOTINg
The information in this document reflects products at the date of printing. Stern Engineering Ltd reserves the right, subject to all applicable laws, at any time, at its sole discretion,
and without notice, to discontinue or change the features, designs, materials and other specifications of its products, and to either permanently or temporarily withdraw any of the
forgoing from the market. All information in this document is provided "as is" without warranty of any kind, either expressed or implied, including but not limited to any implied
warranties of merchantability, fitness for a particular purpose, or non-infringement. Stern Engineering Ltd assumes no responsibility for errors or omissions in the information
presented in this document. In no event shall Stern Engineering Ltd be liable for any special, incidental, indirect or consequential damages of any kind, or any damages whatsoever
arising out of or in connection with the use or performance of this information. The tradenames, trademarks, logos and service marks presented in this document, including their
design, are the property of Stern Engineering Ltd or other third parties and you are not permitted to use them without the prior written consent of Stern Engineering Ltd or such third
party as may own them.
TEchNIcal DaTa
Extreme LFE 237810
Power supply 9V Alkaline Battery or 9V Transformer
0.5-8.0 bar (7-116 PsI)
recommended water
With water pressure of more than 8 bars, use a pressure
pressure
reducing valve for reduction.
Preset sensor range 95mm / (customizable with optional remote control)
minimum sensor range 30 mm
maximum sensor range 120 mm
Security time
90 seconds. Can be reduced with optional remote control.
Hot water temperature
max 70˚C
Extreme LFB 237820
1