AWT E-Series Montage- Und Bedienungsanweisung Seite 31

7 Heater
7.1 The heater can only be used while the massage function is running.
7.2 Use the navigations buttons till the cursor is on
Touching the button will shut the heater off.
The default temperature is set to 37°C
The automatic heating: if the water temperature ≥ the set water temperature
+1° C, the heater stops. If the water temperature ≤ the set temperature -1 ° C, the heater.
The icon is displayed dynamically.
7.3 When the cursor is on the
You can now use the navigation buttons to change the temperature.
The temperatue is changed in steps of 1°C. If you hold the button the temperature will
change by 1°C every 0,5 seconds. After 5 seconds of inactivity the display will exit the
setting and show the current water temperature
7.5 Temperature setting range:：30°C~45°C.
hold the until the temparature flashes on the display.
and touch to start the heater.
Controlpanel
27