Control Panel - AWT E-Series Montage- Und Bedienungsanweisung

Controlpanel
1. Most buttons will give a acousitc feedback.
2. Power
2.1 Touch
hold this button 2 seconds to switch the pool off.
3. Navigation & lights
3.1 If the pool is switched on, use
3.2 To switch on the on or off make sure the cursor is placed on
4. Child lock
4.1 After 3 minutes of inactivity the pool enganges the child lock.
The display shows "LOCK". touch and hold any button to unlock, "LOCK" will now
disapear from the display.
5. Ozone
5.1 Use the navigations buttons till the cursor is on
5.2 The ozone will be turned off automatically after 10 minutes.
6. Massage funktion.
6.1 The pool is provided with a water level sensor this prevents the water pump
from switching on without enough water. This prevents the pump from overheating.
6.2 Use the navigations buttons till the cursor is on
massage function. touching the button again will switch of the massage function.
The icon is displayed dynamically.
6.3 The massage function will only start if the pool has enough water.
26
Power/Setting
for 2 seconds to turn on the pool, this also switches on the lights.
Left Right
and to navigate left or right.
and touch
and touch
OK
Ok
and touch .
to start the ozone.
to start the