On A Photovoltaic Solar Panel - tecsup BABY Bedienungsanleitung

BABY
5.3 On a photovoltaïc Solar Panel
Plug-in the Solar Panel cable (found inside the case) and connect to the
"entrée 12VDC'" socket.
Connect the Solar Panel to the cable; be careful to respect the polarity.
The maximum power delivered from the Solar Panel must not exceed
80Wc; if the power exceeds 80W effective, BABY's internal solar
regulator will cut in and block the charge until an acceptable power
level is detected.
Once the charge is finished, unplug and make sure the protective
waterproof caps are screwed onto the sockets.
The Solar Panels proposed in the list of accessories can be plugged
directly to the lamp via the "entrée 12VDC'" socket.
If a cable (mains or cigarette lighter) is damaged, it must be replaced
by a cable from the company TECSUP (see #10).
TECSUP – BABY – Users manual - 80300106 G – P 22 / 41