Control Panel - tecsup BABY Bedienungsanleitung

The button "On /Off" switches the light on.
The lamp goes on instantly and reaches its full power in less than 3
seconds, whatever the outside temperature.
A further push on the button will switch the lamp off.
The "Lighting'" button selects the different power of lighting
• 100% = 3500 lumens.
• 50% = 1750 lumens.
• 15% = 525 lumens.
• Mode « beacon » ( . . . )
• Mode « SOS » in Morse ( ...---... )
A long push on this button will activate the « Stand-By » mode
described on #3-3, indicated via the blue LED.
The led "Charge" gives the state of charge of the battery pack
and can indicate 5 different levels :
• green flashing
• green fix
• orange fix
• red fix
• red flashing
TECSUP – BABY – Users manual - 80300106 G – P 17 / 41
BABY

2 / CONTROL PANEL

Stand-by
3 s
: charge 100 %
: charge > 60 %
: charge > 30 %
: charge > 10 %
: charge < 5 %
Charge
> 60 %
> 30 %
< 30 %