General Guidelines - HQ Power VDLLMS1 Bedienungsanleitung

• Make sure that the available voltage does not exceed the voltage stated in
the specifications of this manual.
• If the external power cord of this device is damaged, it shall exclusively
be replaced by the manufacturer, service agent or qualified technician in
order to avoid hazard.
• Disconnect the device from the mains to clean it or when it is not in use.
Handle the power cord by the plug only.
• There may be some smoke or a particular smell when the device is
activated for the first time. This is normal and any smoke or smell will
gradually disappear.
• Do not look directly at the light source as sensitive people may go into
epileptic seizure if they do.
• Note that damage caused by user modifications to the device is not
covered by the warranty.
• Keep the device away from children and unauthorised users.

3. General Guidelines

• This device is designed for professional use on stage, in discos, theatres,
etc. The spot should only be used indoors with an alternating current of
max. 230 VAC~50 Hz.
• Lighting effects are not designed for permanent operation: regular
operation breaks will prolong their lives.
• Do not shake the device. Avoid brute force when installing or operating
the device.
• Select a location where the device is protected against extreme heat (see
"Technical Specifications"), dust and moisture. Respect a minimum
distance of 0.5 m between the device's light output and any illuminated
surface.
• Use an appropriate safety cable to fix the device (e.g. VDLSC7 or
VDLSC8).
• Familiarise yourself with the functions of the device before actually using
it. Do not allow operation by unqualified people. Any damage that may
occur will most probably be due to unprofessional use of the device.
• Use the original packaging if the device is to be transported.
• All modifications of the device are forbidden for safety reasons.
• Only use the device for its intended purpose. All other uses may lead to
short circuits, burns, electroshocks, crash, etc. Using the device in an
unauthorised way will void the warranty.
4. Features
• extremely compact housing, high power output
• spare colour lenses included
• use this LED pin spot as a replacement for your regular PAR36 spot
26.03.2010
VDLLMS1
3
Rev 01
©Velleman nv