Connecting Speakers - Sherwood R-807 Bedienungsanleitung

Connecting Speakers

Carefully check the left (L) and right (R) channels and the polarities on the speakers being connected to this receiver.
Connecting Speaker Wires
1
Strip away approx. 10 mm (3/8 inch) of wire
insulation, and then tightly twist the wire ends.
2
Loosen the speaker terminal by turning it
counter-clockwise.
Rear Panel
Sub
Sub
Woofer Woofer
Font Front Font Front
Right Right Left Left
3
Insert the bare part of the wire.
4
Tighten the speaker terminal by turning it
clockwise.
Surround Surround Surround Surround Center Center
Right Right Left Left
making Connections
Surround Back/ Surround Back Surround Back/ Surround Back
/Front Height /Front Height
Front Height/ Front Height/
/Room2 /Room2
Room2 Room2
Right Left
Right Left
13