General Guidelines - Velleman CAMCOLD18 Bedienungsanleitung

1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal
of the device after its lifecycle could harm the environment. Do
not dispose of the unit (or batteries) as unsorted municipal waste;
it should be taken to a specialized company for recycling.
This device should be returned to your distributor or to a local
recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before
bringing this device into service. If the device was damaged in transit, don't
install or use it and contact your dealer. Damage caused by disregard of
certain guidelines in this manual is not covered by the warranty and the
dealer will not accept responsibility for any ensuing defects or problems.
2.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages
of this manual.
• Protect this device from shocks and abuse. Avoid brute force when
operating the device.
• Protect the device against extreme heat and dust.
• Familiarise yourself with the functions of the device before actually using it.
• All modifications of the device are forbidden for safety reasons.
• Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
3.
Installation
Refer to the illustrations on page 2 of this manual.
• Hold the mounting plate [D] and unscrew the fixation ring [C] by turning it
counter clockwise. This also releases the cover [B].
• Mount the mounting plate using 2 screws (see arrows).
• Screw the cover [B] with the fixation ring [C] back in place. Make sure the
transparent part of the cover is in front of the lens [A].
• Connect the video [1] and power [2] cables.
16/02/2010
CAMCOLD18
User manual
3
Rev. 01
®
©Velleman nv