Velleman BTSP5 Bedienungsanleitung Seite 5

To charge the battery:
1. Connect the device to a powered USB port using the included USB
cable.
2.
The red LED will switch off when charging is completed.
7. Preparing Your Speaker
1. Unfold the speaker.
3. Adjust the angle to the desired position
4.
Connect your smartphone to the speaker.
8. Connection
8.1 Connecting Your Smartphone via Cable
Cable connection is only possible through the AUX jack.
1.
Interconnect your smartphone (or other device) and the speaker using
the included connection cable with 2 x 3.5 mm plugs.
2. Switch on your smartphone (or other device) and then the speaker.
8.2 Connecting Your Smartphone via Bluetooth
Pair your smartphone (or other device) to the speaker. Note that the
devices must be at a distance of 10 metres or less of each other.
1.
Switch on the speaker. The green LED will flash.
2.
Activate the Bluetooth function on your smartphone (or other device).
Refer to your device's user manual.
3.
Make your smartphone (or other device) search for the Bluetooth
device. Refer to your device's user manual.
V. 02 – 26/08/2014
BTSP5
2. Place your smartphone in the
speaker.
5 ©Velleman nv